{"product_id":"arch-shower-niche-350-x-600-x-90mm-prefabricated-recessed-wall-niche","title":"Arch Shower Niche 350 x 600 x 90mm — Prefabricated Recessed Wall Niche","description":"\u003ch3\u003eA Prefabricated Recessed Shower Niche, Ready to Install\u003c\/h3\u003e \u003cp\u003eCreate built-in bathroom storage with this prefabricated recessed shower niche, designed to be installed within a framed wall and finished with tiles.\u003c\/p\u003e \u003cp\u003eMade from coated XPS backer board, the niche provides a ready-made recess for storing shampoo, soap and other shower essentials. Installation involves preparing and framing the wall opening, securing the niche, applying waterproofing and finishing with tiles.\u003c\/p\u003e \u003cp\u003eThe body is made from closed-cell extruded polystyrene (XPS), with fibreglass mesh embedded in a polymer-modified cement coating on both faces and finished with a black coating.\u003c\/p\u003e\u003ch3\u003eSpecifications \u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eShape: Arched top\u003c\/li\u003e\n\t\u003cli\u003eExternal size: 350 × 600mm\u003c\/li\u003e\n\t\u003cli\u003eInternal size: 326 × 576mm (± 2mm)\u003c\/li\u003e\n\t\u003cli\u003eExternal depth: 90mm\u003c\/li\u003e\n\t\u003cli\u003eInternal depth: 78mm (± 2mm)\u003c\/li\u003e\n\t\u003cli\u003eSuits: 90mm timber stud wall\u003c\/li\u003e\n\t\u003cli\u003eWall opening required: Frame a rectangular box with the top noggin touching the top of the arch, 2-3mm clear at the sides and base. Cut the lining to the arch shape.\u003c\/li\u003e\n\t\u003cli\u003eConstruction: 12mm coated XPS backer board, black coating\u003c\/li\u003e\n\t\u003cli\u003eSupplied with: 10 screws and 10 stainless steel washers\u003c\/li\u003e\n\t\u003cli\u003eInterior: Single open recess, no internal divider\u003c\/li\u003e\n\t\u003cli\u003eMaximum load on base: 20kg static, once installed, tiled and grouted\u003c\/li\u003e\n\t\u003cli\u003eMaximum tile weight: 62kg per square metre\u003c\/li\u003e\n\t\u003cli\u003eMinimum tile size: 100 × 100mm, at least 7mm thick\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMeasure the niche itself, then cut the opening to its external size plus 2 to 3 mm all round.\u003c\/li\u003e\n\t\u003cli\u003eAll four edges must be supported by framing.\u003c\/li\u003e\n\t\u003cli\u003eSet the niche with its front edges flush with the face of the wall lining. Fix it level and plumb, through its top, bottom and side walls into the surrounding studs and noggings, with the 10 screws and 10 washers supplied. Each screw must go at least 20 mm into the timber.\u003c\/li\u003e\n\t\u003cli\u003eFrame a rectangular box around the niche, with the top noggin touching the top of the arch and 2 to 3 mm clear at the sides and base. Cut the wall lining to the arch shape, and fit short blocking in the two top corners so the curved edge of the lining is supported. Fix through both side walls into the studs, through the base into the bottom noggin, and through the top of the arch into the top noggin.\u003c\/li\u003e\n\t\u003cli\u003eSeal every screw head and the joint around the niche with waterproof sealant that is compatible with your waterproofing membrane.\u003c\/li\u003e\n\t\u003cli\u003eTile the base with a slight fall towards the front so water drains out. The fall is built in the tile adhesive.\u003c\/li\u003e\n\t\u003cli\u003eDo not trim the niche to suit a shallower wall. Pack the wall out instead.\u003c\/li\u003e\n\t\u003cli\u003eIn masonry, bed the niche into the recess on cement-based flexible tile adhesive, with a lintel over the opening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWaterproofing — please read\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe niche is a water-resistant substrate. It is not a waterproofing membrane. You must still apply a waterproofing membrane in accordance with AS 3740 before tiling. Polyurethane, acrylic, SBR and polymer-modified cementitious liquid membranes are all compatible. Do not use unrefined solvent-based bitumen or high-solvent adhesives over the coating. Tile with a cement-based flexible adhesive — not ready-mixed, not solvent-based. Form all internal corners and wall-to-floor junctions as flexible expansion joints, not grout.\u003c\/p\u003e\n\n\u003cp\u003eDo not fix grab rails, folding seats or basins to the niche. Those must go to the framing behind, or to a purpose-built frame.\u003c\/p\u003e\n","brand":"Della Francesca","offers":[{"title":"Default Title","offer_id":68433751539897,"sku":"JIT-N112","price":79.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0250\/1767\/9951\/files\/0ec5ae606776957f8df04c48fa1cfd30.jpg?v=1795192296","url":"https:\/\/www.factoryfast.com.au\/products\/arch-shower-niche-350-x-600-x-90mm-prefabricated-recessed-wall-niche","provider":"FactoryFast.com.au","version":"1.0","type":"link"}